Characterizing physical habitat preferences and thermal refuge occupancy of brook trout (Salvelinus fontinalis) and Atlantic salmon (Salmo salar) at high river temperatures

Anthropogenic influences, including climate change, are increasing river temperatures in northern and temperate regions and threatening the thermal habitats of native salmonids. When river temperatures exceed the tolerance levels of brook trout and Atlantic salmon, individuals exhibit behavioural thermoregulation by seeking out cold‐water refugia – often created by tributaries and groundwater discharge. Thermal infrared (TIR) imagery was used to map cold‐water anomalies along a 53 km reach of the Cains River, New Brunswick. Trout and salmon parr did not use all identified thermal anomalies as refugia during higher river temperature periods (>21°C). Most small‐bodied trout (8–30 cm) were observed in 80% of the thermal anomalies sampled. Large‐bodied trout (>35 cm) required a more specific set of physical habitat conditions for suitable refugia, that is, 100% of observed large trout used 30% of the anomalies sampled and required water depths >65 cm within or adjacent to the anomaly. Densities of trout were significantly higher within anomalies compared with areas of ambient river temperature. Salmon parr were less aligned with thermal anomalies at the observed temperatures, that is, 59% were found in 65% of the sampled anomalies; and densities were not significantly different within/ outside anomalies. Salmon parr appeared to aggregate at 27°C, and after several events over 27°C variability in aggregation behaviour was observed – some fish aggregated at 25°C, others did not. We stipulate this is due to variances of thermal fatigue. Habitat suitability curves were developed for velocity, temperature, depth, substrate, and deep water availability to characterize conditions preferred by fish during high‐temperature events. These findings are useful for managers as our climate warms, and can potentially be used as a tool to help conserve and enhance thermal refugia for brook trout and Atlantic salmon in similar systems.     

水下图像处理技术研究综述

随着自主式水下机器人的发展，水下探测技术成为新的研究热点。然而，吸收效应和散射效应导致水下获取的图像存在雾化和色彩偏差等缺陷。降质的水下图像在一定程度上降低了水下目标识别的准确性。为了改善水下图像质量，国内外学者对水下图像处理方法进行了深入研究。因水下图像处理方法对提升水下目标识别准确性具有良好的促进作用，故其具有重要的研究与分析价值。介绍了水下成像模型，分析了水下图像视觉质量下降的原理；根据水下物理成像模型将水下图像处理方法分为水下图像增强与水下图像复原，并分别对两类方法的研究现状进行分析与归纳；最后，总结与讨论了各类方法的优缺点，并展望了未来的发展方向。     

一种家用手持式红外偏振光治疗仪的设计与实现

红外偏振光治疗仪是一种将红外技术与电子技术应用到医学领域的康复理疗设备,主要用于软组织损伤和慢性疼痛的康复治疗,已在医院得到了推广使用。然而,现有医院使用的台式治疗仪由于体积大、售价高等特点,不方便居家使用。为了开发体积小、售价低、家庭可用的红外偏振光治疗仪,满足家用市场的潜在需求,本文提出了一种新的便携手持式红外偏振光治疗仪,并开发了该智能控制系统。本文首先介绍了一种新的家用手持式治疗仪应具备的特点和关键技术指标,在此基础上设计了手持式治疗仪的硬件总体方案和软件架构,简要介绍了该治疗仪的一些关键技术,最终实现了治疗仪样机的研制。为了验证该样机的性能,本文通过大量的测试,结果表明,研制的手持式红外偏振光治疗仪在关键参数指标上达到了医院同类产品的水平,能够很好地满足家用的需求,具有良好的市场前景。     

Bacterium‐Templated Polymer for Self‐Selective Ablation of Multidrug‐Resistant Bacteria

The recognition and inactivation of specific pathogenic bacteria remain an enormous scientific challenge and an important therapeutic goal. Therefore, materials that can selectively target and kill specific pathogenic bacteria, without harming beneficial strains are highly desirable. Here, a material platform is reported that exploits bacteria as a template to synthesize polymers with aggregation‐induced emission (AIE) characteristic by copper‐catalyzed atom transfer radical polymerization for self‐selective killing of the bacteria that templates them with no antimicrobial resistance. The bacteria‐templated polymers show very weak fluorescence in aqueous media, however, the fluorescence is turned on upon recognition of the bacteria used as the template to synthesize the polymer even at a low concentration of 600 ng mL^?1. Moreover, the incorporated AIE fluorogens (AIEgens) can act as an efficient photosensitizer for reactive oxygen species (ROS) generation after bacteria surface binding, which endows the templated polymers with the capability for selective bacterial killing. The bacterium‐templated synthesis is generally applicable to a wide range of bacteria, including clinically isolated multidrug‐resistant bacterial strains. It is envisioned that the bacterium‐templated method provides a new strategy for bacteria‐specific diagnostic and therapeutic applications.     

Inverse identification of constitutive parameters from heat source fields: A local approach applied to hyperelasticity

In this paper, a new inverse identification method of constitutive parameters is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source field from two different approaches by using the heat diffusion equation. The first one requires the temperature field measurement and the value of the thermophysical parameters. The second one is based on the kinematic field measurement and the choice of a thermo-hyperelastic model that contains the parameters to be identified. The identification is carried out at the local scale, ie, at any point of the heat source field, without using the boundary conditions. In the present work, the method is applied to the challenging case of hyperelasticity from a heterogeneous test. Due to large deformations undergone by the rubber specimen tested, a motion compensation technique is developed to plot the kinematic and the thermal fields at the same points before reconstructing the heterogeneous heat source field. In the present case, the constitutive parameter of the Neo-Hookean model has been identified, and its distribution has been characterized with respect to the strain state at the surface of a cross-shaped specimen.     

镜面杂质与水汽吸放对露点仪影响的实验研究

显微成像露点仪在研制和测试过程中发现镜面杂质和内腔材质吸放水汽等影响测量精度的问题。针对镜面杂质对显微成像露点仪测量的影响开展了镜面图像特征的实验研究，结果表明：镜面杂质点处露珠凝结具有优先性，且反复凝结消散后镜面出现杂质沉降现象。针对水汽吸放对显微成像露点仪的影响开展了水汽释放与吸附效应的实验研究，结果表明：当温度发生变化时，显微成像露点仪感应舱内壁氧化铝材质存在释放（或吸附）水汽现象，使得显微成像露点仪测量值偏大（或偏小）。研究结果为露点仪在功能设置及镜面与腔体材料选择方面提供了参考。     

红外热成像在乳腺疾病检测的应用研究

乳腺疾病已严重危害女性身心健康,其中乳腺癌更位居全球范围内女性癌症发病率和死亡率首位,因此乳腺癌的早期发现意义重大。传统结构影像学早期检测疾病具有一定局限性,而红外热成像作为功能成像技术可为乳腺癌的早期筛查提供有效线索。因此本文主要就红外热成像在乳腺疾病的早期检测及预后评估的应用价值进行综述。     

一种射频抗电磁干扰的矿用红外温度传感器

设计了一种适用于复杂条件下实施井下温度探测的射频式红外温度传感器。借助于光学系统、光电探测器实时感应井下温度并提取温度信号,同时在DC-DC电源隔离模块中实施EMI滤波以抗电磁干扰,处理后的信号经过A/D转换、运算器放大后显示在LCD上,实施读取数据并记录在传感器的存储片上,实现了矿井复合灾害条件下的温度测试,测试精度控制在±2%。     

综掘设备人员识别预警系统

为解决煤矿井下综合掘进设备由于视野盲区造成的后部输送机摆动误伤行人的安全问题,以红外成像和图像处理技术为基础,设计出一种适用于井下综掘设备的人员识别预警系统。系统采用模块化设计和集成封装,在连续采煤机上进行应用测试并进行结构优化,测试证明系统识别精度高,响应迅速,能够准确识别综掘设备危险区域内的行人,并实现危险区域外2 m范围内的人员预警及1 m范围1 s内的中断停机操作。     

叠前深度偏移技术在白秋地区应用效果分析

白秋地区位于南阳凹陷东南部,构造背景是一个被后期北东向断层切割复杂化了的鼻状构造,该区地下构造复杂,断层发育,地层被多期断层交汇切割,同时埋深又比较大,使得常规地震处理不能对该地区地层准确成像。叠前深度偏移技术在白秋地区的应用,提高了区内地层的成像精度,精细刻画了较小的断层断块,满足了地质人员的解释需求。